|Back to mnoGoSearch site||
|q||text parameter with search query|
|s||characters sequence, specifying results sorting order. Small caps specify ascendant sorting, upper caps - descendant. Following characters can be used: R or r - for sorting by relevancy, P or p - for sorting by PopularityRank, D or d - for sorting by last modified date. U or u - for sorting by URL. S or s - for sorting by section (see "su" parameter). Default value: RP.|
|su||section name to sort results. This parameter must be used with "s=S|s".|
|sl.*||section limits. You can limit searches with defined section value. E.g.: sl.title=Top|
|fl||Loads a fast limit with the given name pattern. The limits should be previously created using the Limit commands. If "fl" value starts with minus character, then the limit is considered as excluding limit. For example, fl=-name restricts search to those documents not covered by the limit "name". SQL LIKE operator is used when loading fast limits during search time, so % and _ wildcards can be used in "fl" pattern. If the pattern matches to more than one limit, then search is restricted to those documents covered by either of them. If excluding limit pattern matches to several limits, then search is restricted to those documents covered by non of the them.|
|ps||page size, number of search results displayed on one page, 10 by default.|
|np||page number, 0 by default (first page)|
|m||search mode. "all" and "any" values are supported. Default value is "all".|
|wm||word match. You can use this parameter to choose word match type. There are "wrd", "beg", "end" and "sub" values which respectively mean whole word, word beginning, word ending and word substring match, with whole word match being default.|
|t||tag limit. Limits search through documents with given tag only. This parameter has the same effect with -t indexer option|
|cat||Category limit. Take a look into the Section called Categories in Chapter 6 for details.|
|ul||URL limit, URL substring to limit search through subsection of database. It supports SQL % and _ LIKE wildcards. This parameter has the same effect than -u indexer option. If relative URL is specified search.cgi inserts % signs before and after "ul" value when compiled with SQL support. It allows to write the URL substring in HTML form to limit search, for example <OPTION VALUE="/manual/"> instead of VALUE="%/manual/%". When full URL with schema is specified search.cgi adds % sign only after this value. For example for <OPTION VALUE="http://localhost/"> search.cgi will pass http://localhost/% in SQL LIKE comparison.|
|wf||Weight factor vector. It allows changing different document sections weights at search time. Should be passed in the form of hex number. Check the explanation below.|
|nwf||"No section" weight factor vector. See the explanation below.|
|g||Language limit. Language abbreviation to limit search results by url.lang field.|
|tmplt||Template filename (without path). To specify template file other standard search.htm.|
|type||Content-Type limit. Content-type to limit search results by url.content_type field. For cache mode storage this should be exact match. For SQL-modes it may be SQL-like pattern.|
|sp||Words forms limit. =1, if you need search all forms for entered words. =0, if you need search only entered words. Default value is 1.|
|sy||Synonyms limit. =1, if you need add synonyms for entered words. =0, do not use synonyms. Default value is 1.|
|tl||Transliteration. =1, or =yes, if you want transliteration. =0, or =no, if you do not want transliteration. Default value is 0.|
|dt||Limit by time. Three types are supported.
If dt is set to back, that means you want to limit result to recent pages, and you should specify this recentness in variable dp.
If dt is set to er,
that means the search will be limited to pages newer or older than the date given.
If dt is set to range,
that means search withing given range of dates. Variables
All times in cached mode are measured with a one hour precision.
|dp||Limit by recentness, if dt value is back.
It should be specified in xxxA[yyyB[zzzC]] format. Spaces are allowed between xxx and A and yyy and so on).
xxx, yyy, zzz are numbers (can be negative!), A, B, C can be one of the following (the letters are the same as in
strptime/strftime functions): s - second, M - minute, h - hour, d - day, m - month, y - year. Examples:
4h30m - 4 hours and 30 minutes 1Y6M-15d - 1 year and six month minus 15 days 1h-60m+1s - 1 hour minus 60 minutes plus 1 second
|dx||is newer/older flag (1 means newer or after, -1 means older or before), if dt value is er.|
|dm||Month, if dt value is er. 0 - January, 1 - February, ... 11 - December.|
|dy||Year, if dt value is er. Four digits. For example, 1999 or 2001.|
|dd||Day, if dt value is er. 1...31.|
|db||Beginning date, if dt value is range. Each date is a string of the form dd/mm/yyyy, where dd is the day, mm is the month and yyyy is a four-digits year.|
|de||End date, if dt value is range. Each date is a string of the form dd/mm/yyyy, where dd is the day, mm is the month and yyyy is a four-digits year.|
|us||Specifies the name of the user defined score list which should be mixed with the scores internally calculated by mnoGoSearch, according to UserScore and UserScoreFactor configuration. if us value is empty, or there's no a "UserScore" command with this name found, this parameter is ignored.|
It is possible to pass the "wf" HTML form variable to search.cgi. "wf" variable represents weight factors for specific document parts. Currently body, title, keywords, description, url parts, crosswords as well as user defined META and HTTP headers are supported. Take a look in the "Section" part of indexer.conf-dist.
To be able to use this feature, it is recommended to set different section IDs for different document parts in the "Section" command of indexer.conf. Currently up to 256 different sections are supported.
Imagine that we have these default sections in indexer.conf:
Section body 1 256 Section title 2 128 Section keywords 3 128 Section description 4 128
"wf" value is a string of hex digits ABCD. Each digit is a factor for corresponding section's weight. The most right digit corresponds to section 1. For the given above sections configuration:
D is a factor for section 1 (body)
C is a factor for section 2 (title)
B is a factor for section 3 (keywords)
A is a factor for section 4 (description)
wf=0001 will search through body only.
wf=1110 will search through title,keywords,description but not
through the body.
wf=F421 will search through:
Description with factor 15 (F hex)
Keywords with factor 4
Title with factor 2
Body with factor 1
It is also possible to set the default "wf" value using the wf search.htm command. If "wf" is omitted in the query and the wf command is not specified in search.htm, all sections factors are 1, which means that all sections have the same weight.
The "nfw" variable uses the same format with "wf". If all found words appear in the only one section, then resulting score becomes lower. It can be used for example to ignore spam in KEYWORDS meta tag. I.e. if you use high "fw" and "nwf" values for the section corresponding to KEYWORDS, then score will high only if a word appeared in KEYWORDS and also in title/section, but not only in KEYWORDS.
When using a dynamic shtml page containing SSI that calls search.cgi, i.e. search.cgi is not called directly as a CGI program. It is necessary to override Apache's SCRIPT_NAME environment attribute so that all the links on search pages lead to the dynamic page and not to search.cgi.
For example, when a shtml page contains a line <--#include virtual="search.cgi">, SCRIPT_NAME variable will still point to search.cgi, but not to the shtml page.
To override the SCRIPT_NAME variable, we implemented a UDMSEARCH_SELF variable that you may add to Apache's httpd.conf file. Thus search.cgi will check UDMSEARCH_SELF variable first and then SCRIPT_NAME. Here is an example of using UDMSEARCH_SELF environment variable with SetEnv/PassEnv Apache's httpd.conf command:
SetEnv UDMSEARCH_SELF /path/to/search.cgi PassEnv UDMSEARCH_SELF
It is often required to use several templates with the same search.cgi. There are several ways to do it. They are given here in the order search.cgi detects the template name.
search.cgi checks the environment variable UDMSEARCH_TEMPLATE. So you can put a path to the desired search template in UDMSEARCH_TEMPLATE.
search.cgi also supports Apache's internal redirect. It checks REDIRECT_STATUS and REDIRECT_URL environment variables. To activate this way of template usage you may add these lines in Apache srm.conf:
AddType text/html .zhtml AddHandler zhtml .zhtml Action zhtml /cgi-bin/search.cgi
Put search.cgi into your /cgi-bin/ directory. Then put the HTML template into your site's directory structure under any name with .zthml extension, for example template.zhtml. Now you may open the search page: http://www.site.com/path/to/template.zhtml You may use any unused extension instead of .zthml, of course.
search.cgi also checks URL part after "search.cgi", available in the PATH_INFO environment variable. I.e. if you point your browser to http://site/search.cgi/search1.html, it uses search1.htm as its template, if you point to http://site/search.cgi/search2.html uses search2.htm, and so on.
If the above three ways didn't work, search.cgi opens a template which has the same name than the script being executed using SCRIPT_NAME environment variable. search.cgi will open a template ETC/search.htm, search1.cgi will open ETC/search1.htm and so on, where ETC is mnoGoSearch's /etc directory (usually /usr/local/mnoGoSearch/etc). So, you can use the same search.cgi with different templates without having to recompile it. Just create one or several hard or symbolic links for search.cgi or copy it and put the corresponding search templates into /etc directory of the mnoGoSearch installation.
Take a look also into Making multi-language search pages section
If you want more advanced results, you may use the query language. You should select "bool" match mode in the search form.
mnoGoSearch understands the following boolean operators:
& - logical AND. For example, "mysql & odbc". mnoGoSearch will find any URLs that contain both "mysql" and "odbc". You can also use + for this operator.
| - logical OR. For example "mysql|odbc". mnoGoSearch will find any URLs that contain the word "mysql" or the word "odbc".
~ - logical NOT. For example "mysql & ~odbc". mnoGoSearch will find URLs that contain the word "mysql" and do not contain the word "odbc" at the same time. Note that ~ just excludes the given word from the results. Query "~odbc" will not find anything!
() - group command to compose more complex queries. For example "(mysql | msql) & ~postgres". Query language is simple and powerful at the same time. Just consider the query as a usual boolean expression.
Since 3.2.39, search query syntax undestands section name references. For example, "title:web body:server" will find those documents having the word "web" in their titles and at the same time the word "server" in their bodies. To make search recognize section names, one needs to copy all Section commands from indexer.conf into search.htm.
Note: Section name references can be combined with boolean operators
Phrase search is activated by using quote characters around the words. For example, the query `"search engine"' will return only those documents having the word "search" immediately followed by the word "engine", while the query `search engine' (i.e. without surrounding quotes) will not require both words to be close to each other.
Note: It is possible to combine two or more phrases in the same query, as well as combine phrases with boolean operators.
Since 3.2.39, automatic phrase search is forced for complex words having dots, dashes, underscores, commas and slashes (-_.,/) as delimiters between word parts. For example, `max_allowed_packet' now automatically searches for phrase `"max allowed packet"', not just for three separate words.
Expired documents are still searchable with their old content.